Solid Carbide Endmill 2 Flute Ball Nose
Full radius ball nose end mill for 3D contouring, die and mold finishing, and smooth surface machining of aluminum and non-ferrous materials. The 2 flute design provides efficient chip evacuation at high feed rates while the precision ground ball tip delivers consistent radius geometry for accurate 3D profiling. Manufactured from premium micro-grain carbide with polished flute faces to reduce material adhesion in aluminum.
2 Flute Ball Nose Endmill Specifications
| Specification | Details |
|---|---|
| Flute Count | 2 Flute |
| Geometry | Ball Nose (Full Radius) |
| Helix Angle | 30° Standard |
| Substrate | Micro-Grain Solid Carbide |
| Coatings | Uncoated / AlTiN |
| Diameter Range | 1mm - 25mm |
| Cutting Length | Standard & Long Reach |
| Shank Type | Parallel (Straight) Shank |
| Application | Aluminum, Copper, Plastics, Non-Ferrous, 3D Contouring |
| ISO Material Groups | ISO N (aluminum and non-ferrous), ISO M (stainless), ISO K (cast iron) |
| Recommended Cutting Speed | Aluminum 200–400 m/min; stainless 40–80 m/min; cast iron 60–120 m/min |
| Typical Feed per Tooth | 0.005–0.03 mm/tooth (rough 3D); 0.005–0.015 mm/tooth (finish 3D) |
Solid Carbide 2 Flute Ball Nose End Mills
Solid carbide 2 flute ball nose end mills are designed for 3D contouring, die and mold finishing, and smooth surface generation in aluminum and non-ferrous materials. The full radius ball tip enables precise 3D profiling with excellent surface finish while maintaining efficient chip evacuation at high feed rates.
Available in standard and long-reach configurations for deep cavity work. Premium micro-grain carbide substrates with polished flute faces reduce material adhesion in aluminum and ensure consistent cutting performance. Ideal for mold shops, pattern makers, and general 3D machining applications.
Contact our sales team for bulk pricing and custom size requirements.
ISO application groups & cutting data. ISO N (aluminum and non-ferrous), ISO M (stainless), ISO K (cast iron). Recommended cutting speeds: Aluminum 200–400 m/min; stainless 40–80 m/min; cast iron 60–120 m/min. Typical feeds: 0.005–0.03 mm/tooth (rough 3D); 0.005–0.015 mm/tooth (finish 3D).
Other End Mills
Looking for Solid Carbide Endmill 2 Flute Ball Nose?
Send your inquiry at [email protected] and our team will get back to you as soon as possible.
Send Email