Solid Carbide Endmill 2 Flute Square
High-performance 2 flute square end mill for high-speed slotting, profiling, and peripheral milling of aluminum and non-ferrous materials. The 2 flute design provides maximum chip evacuation capacity, making it ideal for operations where chip clearance is critical. Manufactured from premium micro-grain carbide with sharp 90-degree cutting edges for precision slotting and shoulder milling.
2 Flute Square Endmill Specifications
| Specification | Details |
|---|---|
| Flute Count | 2 Flute |
| Geometry | Square (90° corner) |
| Helix Angle | 30° Standard / 45° High Helix |
| Substrate | Micro-Grain Solid Carbide |
| Coatings | Uncoated / AlTiN |
| Diameter Range | 1mm - 25mm |
| Cutting Length | Standard & Long Reach |
| Shank Type | Parallel (Straight) Shank |
| ISO Material Groups | ISO N (aluminum and non-ferrous), ISO M (stainless steel), ISO K (cast iron) |
| Recommended Cutting Speed | Aluminum 200–400 m/min; stainless steel 40–80 m/min; cast iron 60–120 m/min |
| Typical Feed per Tooth | 0.005–0.03 mm/tooth (aluminum); 0.01–0.02 mm/tooth (steel) |
| Application | Aluminum, Copper, Brass, Plastics, Non-Ferrous Metals |
Solid Carbide 2 Flute Square End Mills
Solid carbide 2 flute square end mills are the preferred choice for high-speed machining of aluminum, copper, brass, and plastics. The open flute design provides maximum chip clearance, preventing chip packing and heat buildup in deep slotting applications. The sharp 90-degree square corner enables precise shoulder milling, keyway cutting, and general profiling operations.
Available in standard 30-degree helix for general-purpose work and 45-degree high-helix configurations for improved chip evacuation in deep cuts. Long-reach variants with relieved necks enable deep cavity milling. Premium micro-grain carbide substrates ensure consistent edge quality and extended tool life across a wide range of non-ferrous materials.
ISO application groups & cutting speeds. These 2 flute square end mills are optimised for ISO N materials (aluminum, copper, and other non-ferrous metals) where recommended cutting speeds range from 200 to 400 m/min at typical feeds of 0.005–0.03 mm per tooth. They are also suitable for ISO M (stainless steel) at 40–80 m/min and ISO K (cast iron) at 60–120 m/min. For maximum tool life in soft materials, run uncoated or polished-flute variants; specify AlTiN coating when pushing higher speeds in heavier sections. Match the parallel shank (standard 3mm–20mm range) to your collet or Weldon holder for rigidity at depth.
Contact our sales team for bulk pricing, special diameters, and custom geometries for your specific machining requirements.
Other End Mills
Looking for 2 Flute Square Endmills?
Send your inquiry at [email protected] and our team will get back to you as soon as possible.
Send Email